Elite Fuji Autoclave

Elite Fuji Autoclave

$0.00 (include GST)
Ex Tax: $0.00
SKU:
Product Code: EAC-1500
Availability: 100
Viewed 2762 times

Available Options

Product Description

Elite Fuji Autoclave

ELITE FUJI AUTOCLAVE Model: EAC-1500 (Class N )


Features

-Suitable for srilizing small amount of devices. The chamber size is 150mm (Diam) x 270mm (Depth). The Chamber capacity is 4.76 Liter.

-Compact and light -weight, these are ceasy to carry and can be insalled even where space are limited.

-It pplis an analogue contololin system. Seiling and drying can be switched manually.

-Set up the switch of control panel in the operation mode to start the operation.

-Simple and ceasy handling of operation panel.

-Feed water into the chamber through the water supply valve, set the timer and fasten the door handle to start the operation.


Capacity and chambe size4.76L/150mm(dia)*270mm(depth)

Recommended breaker

Over 10A
System controlling methodAnalogue controlling systemOutside dimension(WxDxH)

340mm*355mm

(460mm)*290mm

Door opening & closingFastened and loosened by a handleWeigh13.2Kg
Water tank/capacityIn-built/1.0 literRecommended space for installing370mm*460mm
Sterilizing temp.132℃/2KgHgSafty systemAutomatic pressure exhaust valve
Sterilizing & dryingCan be switched over manuallyStandard accessories1 rack, 2 trays and 1 heater guard, a warranty card.
Water feedingCan be fed through a water supply valve manually

PowerAC-220V 50/60HzMaximum current7.0A
DryingResidual heat drying

Heater750W/AC-220V


ELITE FUJI AUTOCLAVE Model: EAC-2200 (Class N )

Easy to use Automatic micro-computer system and high speed water feeding pump are applied. Water can be supplied automatically just by pressing the button on the keypad. After setting the time for sterilizing and drying by pressing the button on the keypad, fasten the handle to start the sterilizing and drying process. The drain hose is set on the side and therefore, water level in the tank can be seen easily. Cost saving Simple switches on the panel save the cost of controlling system. Only two operation modes Auto mode is for sterilizing and drying. Dry mode is for additional drying. Pressure safety system If the breaker is cut or power supply is cut during the sterilizing operation, the pressure will automatically decline to keep the chamber safe. By turning of the power supply switch, the pressure in the chamber will automatically decline in any occasion. Further, if the pressure surpasses the regulated value, the pressure will emitted to the water tank automatically.

Capacity and chambe size
14L/220mm(Dia)*378mm(Depth)Dimension(W x D x H)/weight475mm*450mm(600mm)*370mm/30Kg
System controlling method
Micro-processor controllingRecommended space for installing505mm(W)*490mm(D)
Door opening & closing
Fastened and loosened by a handleStandard Accessories1 rack, 1 tray handle, 2 trays, 1 heater guard and a warrenty card.
Water tank/capacity
In-build/3.3 liter

Sterilizing temp.
120℃/132℃, switchable

Mode changeAuto/dry, switchable

PowerAC-220V 50/60Hz

DryingResidual heat

Heater1200W/AC-220V

Safty system(pressure safty valve, decompression system for emergency, over-current protector )



ELITE FUJI AUTOCLAVE  Model: EAC-2600 (Class N ) 


Easy setting of sterilizing and drying time: -

Time of serilizing and drying with remaining heat can be set easily just by pressing the button on the keypad. The drain hose is set on the side and therefore, water level in the tank can be seen easily.

High speed water feeding system: -

Water can be supplied within 8-12 seconds just by pressing the button on the keypad.

Cost saving

Simple switches on the panel save the cost of cnrtolling system.

Only two operation modes

Auto mode is for serilizing and drying. Dry mode is for additional drying.

Pressure safety system: -

Operation can be stopped just by turning off its switch even during sterilizing or drying process. Soon after turning off the switch, the pressure will dcline automatically and all functions will be stopped. Before restarting the autoclave ensure to cool down the chamber for about 20 mins.


Capacity and chambe size
16.0liter/ 220mm(Diam)*445mm(Depth)Outside dimension(WxDxH)520mm*530mm(680mm)*370mm(handle is included)
System control
Micro- processor controllingSpace for installation(WxD)550mm*570mm
Sterilizing temp.
121℃/132℃, swithableWeight34.5Kg
Mode change
Auto/dry, switchableStandard Accessories1 rack, 1tray handle, 2 trays, 1 heater guard and warranty card
Drying
Residual heat

Water tank/capacityIn-built/3.3 liter

Water feedingOne-touch button

Door opening & closingFastened and loosened by a handle

Power supply/currentAC-220V 50/60Hz/7A

Heater1500W/AC-220V




EAC-1500
ELITE FUJI AUTOCLAVE Model: EAC-1500 (Class N )
Email for Quotation
EAC-2200
ELITE FUJI AUTOCLAVE Model: EAC-2200 (Class N )
Email for Quotation
EAC-2600

ELITE FUJI AUTOCLAVE  Model: EAC-2600 (Class N ) 

Email for Quotation


Write a review

Please login or register to review

When you order from google.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

The total time it takes to receive your order is shown below:

img

The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!