NeuroTrac MYOPLUS 4 PRO EMG Biofeedback Stimulation Unit

NeuroTrac MYOPLUS 4 PRO EMG Biofeedback Stimulation Unit

$0.00
Product Code: MYO420P
Availability: 1
Viewed 7053 times

Product Description

NeuroTrac MYOPLUS 4 PRO EMG Biofeedback Stimulation Unit

  -Pre-set programmes for Incontinence treatment, Sports and muscular development, neuromuscular Rehabilitation.

  -Designed for Physiotherapist in mind to be used as a portable tool. Suitable as a personal trainer for in-clinic or home use (under guidance).

  -2 channel EMG (Biofeedback) combined with 4 channel NMES (stimulation).

  -2 channel ETS (EMG triggered stimulation) with stimulation on 4 channels.

  -Simple single-phase or multiphase operation: multiphase allows EMG/ETS/STIM to be combined in one programme.

  -Multilingual LCD screen and voice prompts for Biofeedback.

  -Manual and Automatic threshold control.

  -EMG Biofeedback between stimulation (muscle activity and tiredness indication when using muscle stimulation).

  -Stand alone device or used in conjunction with established multilingual software.

  -Up to 10 metres of wireless (Bluetooth) connection for NeuroTrac Software.

  -For home users: Produces and prints (with the optional PC Software) the comprehensive patient progress reports on a day to day basis providing average readings (2 channels) on work/rest, peak, onset and muscle release times, work and rest deviations and the average mA current.

  -Used as a learning tool for both patient and clinician with emphasis on improving treatment techniques in the use of EMG and Neuromuscular stimulation.

TECHNICAL DATA

EMG

  -Dual channel EMG

  -EMG Range: 0.2 to 2000 μV RMS (continuous)

  -Sensitivity: 0.l μV RMS

  -1.3 Accuracy: 4% of ìV reading +/-0.3 μV at 200 Hz

  -1.4 Selectable Bandpass filter – 3db Bandwidth,

  -a. Wide: 18 Hz +/- 4 Hz to 370 Hz +/- 10% – Reading below 235 microvolts 10 Hz +/-3 Hz to 370 Hz +/- 10% – Reading above 235 microvolts

  -b. Narrow: 100 Hz +/- 5% to 370 Hz +/- 10% 1.5 Notch filter: 50 Hz (Canada 60Hz) – 33 dbs (0.1% accuracy)

  -Common Mode Rejection Ratio: 130 dbs Minimum @ 50 Hz

  -Work / Rest periods: 2-99 seconds

  -Number of Trials: 1-99

STIM (Neuromuscular Stimulation)

  -4 channel Stimulator

  -Amplitude: 0-90 mA into 500 Ohm load – actual mA will tend to be less than indicated due to Electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 75 mA, at 1500 Ohms load the maximum will be limited to 50 mA.

  -Type: Constant current, maximum output voltage 70 Volts +5 / -10 Volts

  -Waveform: Symmetrical, rectangular, bi-phasic with net zero DC current

  -Pulse width selection: 50-450 μS (2% accuracy)

  -Pulse rate selection: 2-100 Hz (2% accuracy)

  -Work / Rest periods: 2-99 seconds

  -Time 1 – 99 minutes

  -Ramp up time: 0.1 – 9.9 seconds

  -Preset and user programmable treatment Programs

  -Automatic output shut off with detection of open electrode above 0.5 mA

Battery: 4 x AA. Low battery indication at 5.4 volts +/- 0.2 volts, automatic shut off when voltage dropps below the low indication. Replace the batteries immediately! The device goes off automatically when not in use (energy saving): for example when in settings and no key pressed over 1 minute, when in stimulation mode (home screen) and all channels are 0mA.

Expected average battery set life [of standard 800 mAh, alkaline]:

a. MyoPlus2: 12-16 hours in STIM, 25 hours in EMG mode.

b. MyoPlus4: 8-16 hours in STIM, 25 hours in EMG mode.

Environmental Conditions for use:

+5 to +40 degrees Centigrade. 15-93% Humidity.

Environmental conditions for storage & transport:

-25 to +70 degrees Centigrade. 15-93% Humidity.

Physical Dimensions: Length 150 mm, Width 89 mm, Depth 35 mm

Weight: MyoPlus4 MyoPlus2 device: 0.16 Kg (without battaeries).

MYO420P
NeuroTrac MYOPLUS 4 PRO EMG
Email for Quotation

Write a review

Please login or register to review

When you order from google.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

The total time it takes to receive your order is shown below:

img

The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!

-15%

360 Stick Vibration Exerciser

$55.00    $65.00  
New

$0.00